Open Access
Numéro |
Med Sci (Paris)
Volume 40, Numéro 1, Janvier 2024
La cavité orale et les dents au cœur de la santé
|
|
---|---|---|
Page(s) | 92 - 97 | |
Section | M/S Revues | |
DOI | ||
Publié en ligne | 1 février 2024 |
- Couso-Queiruga E, Stuhr S, Tattan M, et al. Post-extraction dimensional changes: A systematic review and meta-analysis. J Clin Periodontol 2021; 48 : 126–44.
- Bornstein MM, Halbritter S, Harnisch H, et al. A retrospective analysis of patients referred for implant placement to a specialty clinic: indications, surgical procedures, and early failures. Int J Oral Maxillofac Implants 2008 ; 23 : 1109–1116.
- Heimes D, Schiegnitz E, Kuchen R, et al. Buccal Bone Thickness in Anterior and Posterior Teeth-A Systematic Review. Healthc Basel Switz 2021; 9 : 1663.
- Muñoz S, Johnson TM, Dutner JM, et al. Implant site development requirements in an advanced dental education program: A series of 290 implants. J Dent Educ 2022; 86 : 1425–34.
- Zhang Y, Al-Maawi S, Wang X, et al. Biomaterial-induced multinucleated giant cells express proinflammatory signaling molecules: A histological study in humans. J Biomed Mater Res A 2019 ; 107 : 780–790.
- Danesh-Sani SA, Loomer PM, Wallace SS. A comprehensive clinical review of maxillary sinus floor elevation: anatomy, techniques, biomaterials and complications. Br J Oral Maxillofac Surg 2016 ; 54 : 724–730.
- Shatta A, Bissada NF, Ricchetti P, et al. Impact of Implant and Site Characteristics on the Pattern of Bone Loss in Peri-implantitis. Int J Oral Maxillofac Implants 2019 ; 34 : 1475–1481.
- Esposito M, Grusovin MG, Felice P, et al. The efficacy of horizontal and vertical bone augmentation procedures for dental implants - a Cochrane systematic review. Eur J Oral Implantol 2009 ; 2 : 167–184.
- Mangano C, Luongo G, Luongo F, et al. Custom-made computer-aided-design/ computer-assisted-manufacturing (CAD/CAM) synthetic bone grafts for alveolar ridge augmentation: A retrospective clinical study with 3 years of follow-up. J Dent 2022; 127 : 104323.
- .
- Backes EH, Harb SV, Beatrice CAG, et al. Polycaprolactone usage in additive manufacturing strategies for tissue engineering applications: A review. J Biomed Mater Res B Appl Biomater 2022; 110 : 1479–503.
- Anderson M, Dubey N, Bogie K, et al. Three-dimensional printing of clinical scale and personalized calcium phosphate scaffolds for alveolar bone reconstruction. Dent Mater 2022; 38 : 529–39.
- Park H, Choi JW, Jeong WS. Clinical Application of Three-Dimensional Printing of Polycaprolactone/Beta-Tricalcium Phosphate Implants for Cranial Reconstruction. J Craniofac Surg 2022; 33 : 1394–9.
- Meglioli M, Naveau A, Macaluso GM, et al. 3D-printed bone models for planning and training in oral and cranio-maxillofacial surgery: a systematic review. 3D Print Med 2020; 6 : 30.
- Babilotte J, Guduric V, Le Nihouannen D, et al. 3D printed polymer-mineral composite biomaterials for bone tissue engineering: Fabrication and characterization. J Biomed Mater Res B Appl Biomater 2019 ; 107 : 2579–2595.
- Tavelli L, Barootchi S, Rasperini G, et al. Clinical and patient-reported outcomes of tissue engineering strategies for periodontal and peri-implant reconstruction. Periodontol 2000 ; 2023 ; 91: 217–269.
- Liu J, Chen D, Zhu X, et al. Development of a decellularized human amniotic membrane-based electrospun vascular graft capable of rapid remodeling for small-diameter vascular applications. Acta Biomater 2022; 152 : 144–56.
- Sándor GK, Tuovinen VJ, Wolff J, et al. Adipose stem cell tissue-engineered construct used to treat large anterior mandibular defect: a case report and review of the clinical application of good manufacturing practice-level adipose stem cells for bone regeneration. J Oral Maxillofac Surg 2013 ; 71 : 938–950.
- Latimer JM, Maekawa S, Yao Y, et al. Regenerative Medicine Technologies to Treat Dental, Oral, and Craniofacial Defects. Front Bioeng Biotechnol 2021; 9 : 704048.
- Engel N, Fechner C, Voges A, et al. An optimized 3D-printed perfusion bioreactor for homogeneous cell seeding in bone substitute scaffolds for future chairside applications. Sci Rep 2021; 11 : 22228.
- Guduric V, Siadous R, Babilotte J, et al. Layer-by-layer bioassembly of poly(lactic) acid membranes loaded with coculture of HBMSCs and EPCs improves vascularization in vivo. J Biomed Mater Res A 2019 ; 107 : 2629–2642.
- Panda S, Satpathy A, Chandra Das A, et al. Additive Effect of Platelet Rich Fibrin with Coronally Advanced Flap Procedure in Root Coverage of Miller’s Class I and II Recession Defects-A PRISMA Compliant Systematic Review and Meta-Analysis. Mater Basel Switz 2020; 13 : E4314.
- Fujioka-Kobayashi M, Miron RJ, Moraschini V, et al. Efficacy of platelet-rich fibrin on bone formation, part 2: Guided bone regeneration, sinus elevation and implant therapy. Int J Oral Implantol Berl Ger 2021; 14 : 285–302.
- Sivolella S, Brunello G, Ferroni L, et al. A Novel In Vitro Technique for Assessing Dental Implant Os搜索引擎优化integration. Tissue Eng Part C Methods 2016 ; 22 : 132–141.
- Roffel S, Wu G, Nedeljkovic I, et al. Evaluation of a novel oral mucosa in vitro implantation model for analysis of molecular interactions with dental abutment surfaces. Clin Implant Dent Relat Res. 2019 ; 21(Suppl 1): 25–33.
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.